The product family
One family.
One mission: clean power.
Five engineered solutions — from the flagship Power Perfect Box at the panel down to a single LED bulb in a bedroom lamp. Every product is designed by Satic Inc. in Missoula, Montana, and validated to UL, FCC, CE and RoHS standards.
Flagship · Wire-in
Power Perfect Box.
The latest advancement in whole-home energy management — combining surge protection, EMF/EMR reduction, EMP shielding and smart-meter privacy in a single panel-mounted unit. Voted the #1 Solar Adder of 2023 and used in more than 100,000 American homes and businesses.
- Whole-home protection from the panel
- EMI/RFI noise reduction up to 50 dB
- EMF / EMR reduction throughout wiring
- Smart-meter privacy protection
- Surge & EMP shielding built in
- Self-healing harmonic rectifiers
Three sizes · one technology
Pick the Power Perfect Box for your panel.
Every variant shares the same Satic clean-power circuitry. The difference is reactive capacity and enclosure rating — matched to the size and electrical service of the building.
Single split-phase
Standard
Smaller homes and condos
- Box size
- 8" × 8" × 4"
- Voltage
- 120 / 208 · 120 / 240 V
- Surge
- 6,500 A peak · 1,300 J/μs
- Enclosure
- NEMA 3X · Indoor / Outdoor
18 PFC modules · three-way protection · 60 μF reactive · self-healing harmonic rectifiers.
Request a quoteSingle split-phase · flagship
RecommendedSuper Duty
Standard American homes (recommended)
- Box size
- 14" × 7.5" × 4"
- Voltage
- 120 / 208 · 120 / 240 V
- Surge
- 6,500 A peak · 1,300 J/μs (dual tri-circuit)
- Enclosure
- NEMA 3X · Indoor / Outdoor
36 PFC modules · 120 μF reactive · doubled filtering capacity vs Standard. The unit specified for almost every Arizona install.
Request a quoteCommercial · 277 / 480 V
Three-Phase Heavy Duty
Light commercial, large homes, shops
- Box size
- 10" × 8" × 4"
- Voltage
- 277 / 480 V three-phase
- Surge
- 10,000 A · 6,500 A (2× pulse)
- Enclosure
- NEMA 4X / 12 · Indoor / Outdoor
18 PFC WYE + 3 PFC Delta · six-way conditioning · 165 μF reactive · designed for commercial panels.
Request a quoteAll variants: UL Listed E337361 · FCC · CE · RoHS · operating range −55 °C to +90 °C · up to 16,000 ft altitude.
Plug-in
Pure Power Plug-In.
A rental-friendly option for targeted rooms.
A single 120 V plug-in conditioner — also known as the EMF Eliminator — that filters and conditions every circuit on its phase. It is a rental-friendly, no-panel-work option for renters, offices, and homeowners targeting a specific room with high EMF: refrigerators, freezers, A/C units and home offices.
Renters who want whole-home coverage may also be eligible for a professionally installed Power Perfect Box in some cases. The unit is removable, but lease and property requirements vary; review your lease and obtain any required authorization before installation.
- Configuration
- 120 V single-phase · NEMA 5-15 plug
- Size
- 5.25" × 3.75" × 2"
- EMI / RF filtering
- Up to 50 dB · 10 kHz – 100 MHz
- Surge
- 6,500 A peak · 1,300 J/μs
- Compliance
- UL E337361 · FCC · CE · RoHS
Diagnostic
SaticShield EMI Meter.
Measure what you can't see.
Plugs into any outlet and immediately displays total electromagnetic line interference in millivolts — peak-to-peak, real-time, with a visual waveform and proportional audio tone. Range 0–2,999 mV. The fastest way to see the problem before and after installation.
- Real-time mV readout · 0–2,999 mV
- Peak-hold capture
- Visual waveform indicator
- Audio tone proportional to noise
- Standard NEMA 5-15 plug
- Before / after comparison tool
Physical shield
Field Shield.
8 layers between you and the source.
A grounded 24″ × 48″ laminated panel that hangs behind a smart meter or breaker panel — or fits under a standard baby crib mattress — to reflect and ground RF, Wi-Fi, 4G and 5G radiation. Built with NASA-grade reflective coating between layered aluminum foil and polyethylene foam, with a 6-foot grounding cord.
Cross-section — 8 bonded layers, top to bottom
Clean-power lighting
SaticPulse LED lightbulbs.
Light without the noise.
Most LEDs use cheap switching drivers that pump dirty electricity back into your wiring. SaticPulse uses a proprietary "quantum photon" driver with a power factor greater than 0.90 and ultra-low total harmonic distortion — the cleanest-running LED on the market.
Not sure which one?
Choose by what you're trying to do.
Renters have options. The Pure Power Plug-In is the simplest removable choice for a room or appliance. In some cases, a professionally installed, removable Power Perfect Box may provide whole-home coverage — but lease and property requirements vary, so review your lease and obtain any required authorization first. Read the rental installation FAQ.
Next step
Talk to a SolaX advisor.
We'll review your panel, your APS or SRP bill, and the rooms you care about most — then recommend the exact combination of Satic products that fit. No pressure, no obligation.